Kendrick Dual Channel Controller

This is the most popular dew controller in the Kendrick range. Simple dial adjustments allow you to set the controller to the correct level to keep dew away.

The Standard Dual Channel has many new features but remains really simple to use. As well, it can handle more power and use that power more efficiently! This newest addition to Kendrick's Dew Remover Systems is sure to be a hit!

Features & Specifications:

• Zero to 100% heater control
  
• Fused onboard. Auto Reset (no other dew controller on the market has this)
  
• On board protection from over current, over temperature, over voltage
  
• LED overcurrent indication at both outputs
  
• 10 amp capacity (5 amps per channel)*
  
• 1.8m detachable fused Power cord. Cord is fused at 7 amps
  
• Reverse polarity protected
  
• On/off switch (no other dew controller on the market has this)
  
• RFI (radio frequency interference) free. A critical feature for astro imagers!
  
• Pulse Width Modulation duty cycle control
  
• 4 outputs, 2 for each control knob
  
• LED Power on indicator for both outputs
  
• Low voltage cut-off control with LED indication (a Kendrick standard!)
  
• Mosfet transistors built on board and on EACH output (no voltage drops!). Get the best possible performance out of your heaters!
  
• Velcro attachment. Parts included.
  
• 12 VDC operation
  
• Dimensions: 100mm x 75mm x 35mm (45mm with knobs)
  
• 1 Year warranty

The power cord has been fused at 7 amps even though the controller is capable of amperages of 5 amps per channel (10 amps total). We do not recommend replacing the power cord fuse with a larger fuse as the power input socket is not rated for a higher amperage.

• Dual Channel Controller
• Power Cable with fused Cigarette Lighter  Connector
• Velcro tabs to attach to your telescope or tripod legs

Standard Dual Channel Controller Manual