How to Shoot the Moon

We’re often asked here at Bintel what the best way to take photos through a telescope is. In reality, half of our store is dedicated to selling not optics, but astronomical cameras, mounts, adapters, filters, and other accessories, so it’s not like there’s a “one size fits all” response. That said, for a beginner buying their first telescope, it’s not particularly hard to take a few shots of the brightest target in the night sky, and this quick guide will show you how, with two easy methods!

1: Use your phone – no additional parts required!

In the same way you position your eye above the telescope eyepiece to view the night sky, you can also position the camera on your phone. With a bit of practice, it’s not too difficult to line up the small pinprick of light to the camera sensor, allowing you to take photos of the moon with ease! Holding the setup still however is a challenge for everybody. Keep at it, and with persistence, you may end up with some very nice shots – the moon image above was taken with an iPad by one of our customers, Paul Woodhouse, and his Celestron CPC. This method will work for all telescopes, and can be used to take zoomed in images during the day too!

If you are struggling to hold your phone steady enough to take an image, it may be worth considering a smartphone mount, which will clip your phone directly to the eyepiece. Mounts similar to this are also available for point-and-shoot fixed lens cameras – see our camera adapters page for more.

2: Use your DSLR (for refractors and SCT cassegrains only)

If you have a DSLR camera with removable lens, taking the next step is an obvious choice to take excellent images. Depending on the brand of your camera, and the type of telescope you have, a few extra parts will be needed as follows, but once you get started, the exciting world of astro-imaging awaits! While this article is specifically about moon photography, this sort of setup will allow the dedicated astronomer to image planets, and some of the brighter deep space objects too, especially if the telescope being used is electronic with GoTo. For the best results, use a remote shutter for your DSLR to avoid unnecessary vibration, available at most good camera stores.

Part One: T-ring for your camera – this will allow your camera to clip onto the back of your telescope just like it would attach to a lens.

DSLR T-Rings

Part Two: Projection Camera Adapter – if you have a refractor, you will likely need this adapter to reach focus (in some instances, the t-ring may work directly on the telescope, but this varies between models). The included extension tube however is a welcome addition to any photographer’s kit, and will allow you to increase the magnification of your images, zooming right in on the moon’s craters!

Bintel 1.25 Inch Eyepiece Projection Camera Adapter

Part Three: SCT Adapter – this replaces the visual back of an SCT (Cassegrain) telescope, and allows the T-ring to screw on. If you have a Nexstar 4SE, you will need the Mak Adapter

Celestron SCT T-Adapter

Now, you’re ready to get started!

moon with dslrThe Moon – by Nicky Ladas with her Celestron CPC from Bintel, and Canon 60D


Potential pitfalls to take note of:

  • DSLR cameras will more often than not fail to reach focus when connected to reflector or dobsonian telescopes, due to the optical arrangement of these systems. For the best results, we recommend only attempting this type of photography with glass-based refractors (of appropriate size) or schmit-cassegrain telescopes, however with the correct t-ring, some reflectors will be able to image (eg: the Skywatcher Collapsible GoTo Dobsonian range)
  • You may have heard of “long exposure astrophotography”, whereby the exposure of a camera is left open for up to half an hour, letting in as much light as possible to create the image. This requires an electronic tracking telescope, but it must be on an EQ-style mount. Most GoTo computerised telescopes we sell are on AZ-style mounts, and must be upgraded with a wedge for this more advanced form of photography. Without a wedge, these telescopes are excellent for short-exposure photos of the moon and planets, and are capable of imaging the brightest deep sky targets, but for the best results, a wedge is recommended. 
  • Please be aware that while any camera can be connected to any telescope with the right parts, mounting a big heavy DSLR on the back of a small refractor or reflector model is always going to cause stability issues, so taking a worthwhile image can be very challenging with this method. 

If you are unsure, please feel free to contact our full-time staff in-store for more details, or advice on how to set up your specific telescope and camera combination for astrophotography.

2 Comments. Leave new

  • Just a comment – with considerable difficulty/trial and error, I was able to take a manually tracked photo (without star trails) of the Trifid Nebula for 10 seconds with a Fuji XM-1 mirror-less camera and T-ring adapter, with a f9 100mm APO refractor, just by rotating the horizontal slow-motion control very slowly. What was apparent was that if there existed a manual EQ mount for refractors, with a very good geared slow-motion control and adjustable reference rotating dial, one could take quite good quick relatively instant deep-sky photos this way – APO refractors do seem to do brighter deep sky imaging very well. Someone once made a gadget from Meccano that had 5 brass worm gears at different angles and five 19-teeth pinions, one rotation of the shaft was very smooth yet equaled a ratio of 19 to power 5 = 2,476,099 gearing ratio – which for 1 rotation in 24 hours would be gearing of about 28.658 rotations per second- the possibility seems to exist of error-distribution technology where one could manually rotate the system or use a motor for easy quick deepsky photos.

  • Hi Alan,

    Glad to hear of your success! Your logic is indeed correct, and with some very simple parts and procedures, it is possible to take passable images of deep sky objects with the setups described above (though of course as you mentioned, usually after considerable difficulty). Some mounts can be upgraded with a simple EQ motor to automate such tracking (eg: we sell the Orion EQ-3M Dual-Axis Electronic Drive in our store for this exact purpose), however at this point in time this and associated products are not up on this website, and we ask that people call us for inquiries so that we can establish whether the product is suitable for their purposes.

    The Bintel Team


Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.

Bintel Coronavirus Update

SYDNEY STORE IS OPEN (BY APPOINTMENT ONLY) In the interest of public health you MUST contact us before arriving at the store. The Sydney Store is open by appointment only including for Click and Collect orders. The Online Store is still taking orders as normal with same day shipping where possible.  CALL (02) 9518 7255 CHECK HOURS…

QLD Town Named After Comet see it return – 5000 Years Early.

The Great Comet on 1844 was seen in many places across the world  but prominently here in Australia. “Ludwig Leichhardt saw Comet Wilmot in the sky on 29 December 1844 while walking along the banks of a creek in central Queensland (Lang, 1847:315), prompting him to name the site Comet Creek. The town of Comet,…

Earth has 2 Moons Now

A new car-sized chunk of space rock has been captured by the Earth’s gravity and is now orbiting the Earth as a “mini-moon”. Designated 2020 CD3 it was discovered by astronomers Theodore Pruyne and Kacper Wierzchoś on 15 February 2020 at Mount Lemmon Observatory during a regular survey of near-earth objects. Its orbit around Earth…

Customer Featured Image : Leigh Hassell

Congratulations to Leigh Hassell who has won a store voucher! (Want to submit your image for a chance? Click here!) Name: Leigh Hassell Photoname: Orion and Running Man Nebulae Notes: Taken with a Williams Optics Z73, ZWO ASI294MC-P, Sky Watcher HEQ5 Mount, ZWO OAG with an ASI224MC guide-cam. Bintel Products used in this image: 

Is Betelgeuse Ok?

BETELGEUSE UPDATE (spoiler alert – it’s still there.) As you may have heard, Betelgeuse, the red giant which we know is towards the end of it’s stellar evolution and ready to go supernova, recently had an unprecedented dimming event. It’s normal periodic variation suddenly dropped off a cliff in a way we’d never seen before….

Star Stuff III – July 18th Byron Bay

Space enthusiasts across Australia have been anticipating the announcement of Star Stuff III at Elements of Byron resort since organisers skipped the event in 2019. Major sponsor and telescope vendor Bintel shared the news and the incredible speaker list which caused a quick flurry of ticket sales from astronomy fans who have been waiting two…

The Cheapest Ways to Start or Improve Your Astronomy

Astronomy, like most hobbies, can quickly get very expensive depending on how far you go down the rabbit hole. If you fall into the trap of buying your way out of problems you may find your family or significant other staging an intervention to avoid losing all your assets because you wanted that shiny new…

Introducing Celestron StarSense Explorers!

The new StarSense Explorer series of Telescopes is a revolutionary new idea that uses your phone to “look” at the sky and tell you where the telescope is pointing. This is the ideal beginner telescope! Watch the video for details about how it works.

The Celestron NexStar Evolution Series (VIDEO)

   Braeden steps you through the key features that make the Evolution Nexstar series from Celestron such a popular telescope choice.  

New ZWO ASI1600GT & ASI183GT Cameras – REVIEWED!

A review by Simon Lewis Introduction ZWO have been synonymous with creating high quality, yet affordable cameras, since their entry into the astro imaging world in 2011. Since then ZWO have taken the market by storm with their renown red anodised CMOS cameras and there will not be many in astrophotography who either don’t own…