The Kendrick Digifire 12 dew controller belongs to the heavy-duty “Prosumer” line with 4 individual adjustable heater ports and programmable power supply suitable for powering popular DSLR cameras. The new DigiFire 8 and 12 models have all the features of our former DigiFire 7 and 10 models, plus some impressive new improvements.
Both models feature:
- Heavy-Duty, individually adjustable power output for up to 4 heaters.
- Built-in 8V DSLR Power Supply. Just add our DSLR Battery Adapter and power you DSLR from the Dew Controller. *
- 2 DC Accessory Ports
- 1 Port 12V up to 7 Amp output
- 2nd port programmable for 12V OR 8V (DSLR Camera Power). Up to 1.5 Amp output
- 15 Amps total power (max 7 Amp with Cigarette Lighter Plug).
- Dimmable lights! In fact, after 2 minutes, they shut-off! Pressing 1 of the 2 control buttons will “wake-up” the lights again
- User Changeable Cord. We strongly recommend you “ditch the Cigarette Lighter Plug”. Chose you own or add our Anderson Power Pole plugs to get all 15 Amps the unit is capable of delivering.
- Cord Management – Power other devices using the 2 DC Accessory Ports. For example, our 12V USB Hub.
- Low Voltage Cut-Off – A Kendrick Standard that saves your battery from permanent destruction.
- NEW>> Disable Low Voltage Cut-Off. We don’t recommend it, but if you want to drain your battery beyond repair it is now possible.
- Reverse Polarity Protection
DigiFire 12 – Temperature Sensing Controller
All the features of the DigiFire 8, PLUS:
- Temperature Sensing control for 2 of the 4 heater ports.
- Heaters are only powered when the temperature of your optics reaches the level you choose. It works on the difference between Ambient Air Temperature and the temperature of your optics. Choose a setting that is 0-10 C°
- Prevents unnecessary over-heating which degrades image quality
- Saves battery power
- Traditional “Duty-Cycle” settings are also available on all 4 heater ports
- Our new temperature sensors are much more accurate and do NOT require “calibration”.
Sensors included: 2 – 1 of these is the Ambient Air Temperature and the other is the Optic Temperature Sensor. Additional Sensors are optional. If you want to use Temperature Regulation on a 2nd optic (telescope), order an extra Temperature Sensor.
* The DSLR power supply is designed for normal astrophotography applications. Specifically, long exposures with momentary delay between exposures. It is NOT design for daytime “burst” exposures.