Starlight Xpress Trius Pro-694 USB Hub CCD Camera (mono)

$3,499.00

AUD Price shown includes GST
GST is removed at checkout for NZ

SKU: 100-0055
Conditionnew
pixelwidth2750
pixelheight2200
pixelsize4.54

 



This item is not currently in stock. You can back order it now or to find out when it will be available call 02 9518 7255 or email sales@bintel.com.au

 Need more info? Simulate this Camera

 Need some help? Contact us.

    We don't like being beaten on price.

    Please fill in the details below and we will respond shortly

    Found a better price? Click here and watch us try to beat it.

    Secure, Encrypted Checkout.
    Credit cards not stored.

    Expert, After Sales Support. 
    We fully support our products!

    Minimum 2-Year Warranty. 
    + extended manufacturer warranties.

    Aussie Owned & Stocked. 
    Ships fast from Sydney!

    Same Day Shipping. 
    If you order before 2pm!

    Starlight Xpress Trius Pro-694 USB Hub CCD Camera (mono)

    • Medium format, high resolution ‘Exview’ CCD chip, with 6,050,000 x 4.54uM square pixels in a 15.98mm diagonal array.
    • True CCD Astrophotography Camera
    • Exceptionally low dark signal – No dark frames necessary for most deep sky objects.
    • Excellent QE of 77% peak in yellow light, 65% at Hydrogen alpha (656 nm).
    • Three port powered USB hub built-in. Can drive a Lodestar PRO or Ultrastar PRO + SX filter wheel.
    • High performance two stage cooling for better than -40C delta T
    • Dry Argon CCD chamber fill for improved cooling performance.
    • Exceptionally effective anti-blooming with minimal effect on linearity and no lost active area.
    • Back focal length 16mm +/-1mm.

    There’s lots of advantages of using a CCD chip for deep-sky imaging compared to CMOS cameras.

    Please note this camera uses a “Grade 1” CCD chip.

    Specifications

    • High speed USB 2.0 interface for approx. 2.5 second downloads.
    • Built-in triple powered USB hub for guider and filter wheel control.
    • Single USB cable control for all features – get rid of that dangerous cable tangle!
    • Very low power consumption. Less than 1.5 amps at 12v DC.
    • Compact and lightweight – only 75mm in diameter x 70mm long – less than 500 grams load on the telescope.

    • CCD type: ICX694AL Exview CCD with ultra-low dark current and vertical anti-blooming.
    • CCD Full resolution pixel data: Pixel size: 4.54uM x 4.54uM, Image format: 2750 x 2200 pixels
    • CCD Image area: 12.49mm (Horizontal) x 9.99mm (Vertical).
    • CCD quality: Grade 1 or better – No bad columns, no dead pixels, no more than 50 ‘hot’ pixels (saturated in <10 seconds).
    • Spectral Response: QE max at 580nM (~77%), 50% roll-off at 360nM and 770nM.
    • Readout Noise: Typically, only 3.5 electrons RMS.
    • Full-well capacity: Greater than 17,000 e- (unbinned)
    • Anti-blooming: Overload margin greater than 800x.
    • Dark current: Less than 0.002 electrons/second @ – 10C CCD temperature.
    • Data format: 16 bits.
    • System gain:  0.27 electrons per ADU
    • Computer Interface: Built-in USB 2.0 compatible interface.
    • Image download time: Typically 2.5 seconds at full resolution.
    • Power requirements: 115VAC / 240VAC @ 12VA, or 12VDC @ 900mA max.
    • Cooling system: Regulated set-point cooling supply with thermoelectric cooler to give a minimum CCD temperature of approximately -40C below ambient.
    • Size: 75 x 70mm black anodised aluminium barrel with 42mm ‘T2’ thread at the CCD window end & input/output plugs at rear. CCD alignment screws are provided for setting the chip parallel to the focal plane.
    • Weight: approx. 450g.

    PRODUCT MANUAL Trius-PRO-694-handbook

    PRODUCT DATASHEET TRIUS-PRO-694-Blue-Datasheet

    Have a question about this product?

      CALL NOW : +61 2 9518 7255 OR EMAIL BELOW

      bintel astronomy experts

      ENQUIRY TYPE

      Related Products For Your Consideration …

      Shopping cart0
      There are no products in the cart!
      Continue shopping
      0