The anti-dew heater strip is used for anti-dew on the front window of the ASI cooled cameras.
AUD Price shown includes GST
GST is removed at checkout for NZ
ZWO Dew heater strip
$29.00
BrandZWO
Conditionnew
In stock
Need some help? Contact us.
Found a better price? Click here and watch us try to beat it.
Secure, Encrypted Checkout.
Credit cards not stored.
Expert, After Sales Support.
We fully support our products!
Minimum 2-Year Warranty.
+ extended manufacturer warranties.
Aussie Owned & Stocked.
Ships fast from Sydney!
Same Day Shipping.
If you order before 2pm!
ZWO Dew heater strip
The thickness of the anti-dew heater strip is 0.2~0.3mm.
The “Y” power cord is designed to connect in-line with the cooler power supply for convenience.
We recommend a DC adapter giving 12V at 0.35 A resulting in a heating power on the strip that is around 4.2 watts. You can use one and same power cord to power both the fan and heater simultaneously, but make sure not to exceed recommended amount of Ampere.
NOTE: for many ASI cameras a heater strip is not necessary since they have one that is built into the cameras themselves.
ASI071MC-P/ASI6200/ASI2600/ASI2400 cameras come with an anti-dew heater that will heat the protective glass to avoid any dew problems.
For ASI183/ASI1600/ASI294/ASI533 cameras, the heat emitting from the TEC will be conducted to the camera case and avoid any dew problems when TEC cooling system is working.
This kit includes the zip-tie, anti-dew heater strip , an Y power cord and two spacers：
How to use it?
1. Tear out the protective film on adhesive tape
2. Put the anti-dew heater strip on the front facing of the camera and make sure the black cable is in the right position
(lining next to the DC plug at the rear end)
3. Tie the black cable with a zip-tie on the camera body.
4. Plug in the power cord, then everything is done.
Now you should be dew-free while shooting with the camera.
